MT-215 OEM Insert Readers are available in a variety of interfaces and head arrangements. They can be mounted either for horizontal or vertical card insertion.
The debris-clearing chassis minimizes down time caused by insertion of foreign objects.
The "Double Sided" / dual head models can read a card with the magnetic stripe orientated in either direction thus minimizing the need to reinsert the card.
A card-present sensor at the rear of the slot notifies the application that a card has been inserted allowing the cardholder to be prompted with further instructions.
Placed where you need them
They can be mounted either for horizontal or vertical card insertion.
Flexible solutions
There are three configurations of the Reader: without bezel, with extended bezel, and with flat-faced bezel. The three bezel options give developers the options they need to integrate into a variety of formats.
Insert any direction
The MT-215 insertion card reader minimizes incorrect card insertion with a dual head design option, and the open frame construction eliminates blocking of the card slot from coins and other debris.
Get connected
TTL, RS-232, USB
| Description | P/N |
| USB Tracks 1, 2 Dual head Flat bezel Stripe up or down |
21065099 |
| USB Tracks 1, 2, 3 Dual head Flat bezel Stripe up or down |
21065140 |
| Interface | USB, RS232, TTL |
| Reference Standards | ISO 7810 & 7811, AAMVA |
| Card Speed | 3 to 60 ips (7,6 to 152 cm per second) |
| Power Input | 12 VDC ±5% |
| Current | |
| Normal Mode | 30 mA |
| Suspend Mode | 300 μA |
| Dimensions | Height: 3 in (76,2 mm) Width: 4 in (101,60 mm) Length: 4.58 in (116,33 mm) |
| Temperature | |
| Operating | -40°F - 158°F (-40°C - 70°C) |
| Storage | -40°F - 176°F (-40°C - 80°C) |
| Humidity | |
| Operating | 10% to 90% noncondensing |
| Storage | 10% to 90% noncondensing |
| Altitude | |
| Operating | 0 - 10,000 ft (0 - 3,048 m) |
| Storage | 0 - 50,000 ft (0 - 15,240 m) |
